Abrasion class (AC rating)
A wear-resistance rating for laminate, from AC1 to AC5. Higher numbers mean a more durable surface, and AC3 or higher is common for busy homes.
Acclimation
Letting flooring sit in the room before installation so it can adjust to the home’s temperature and humidity.
Baseboard
The trim board along the bottom of a wall, which also covers the small gap left around a floating floor.
Click-lock
Interlocking plank edges that snap together without glue or nails, used on many LVP and laminate floors.
Cupping
When the edges of a wood board rise higher than the center. It is usually a sign of moisture.
Engineered hardwood
A floor with a real-wood top layer bonded to a layered core, which makes it more stable than solid wood. See engineered vs. solid hardwood.
Expansion gap
A small space left around the edges of a floating floor so it can expand and contract, hidden by baseboards or trim.
Floating floor
A floor that is installed over the subfloor without being glued or nailed to it. The planks lock to each other instead.
Grout
The material that fills the spaces between tiles. It needs time to cure and often needs sealing.
Leveling compound
A cement-based material that fills low spots in a subfloor so the surface is flat.
Lippage
When the edges of neighboring tiles sit at slightly different heights.
LVP (luxury vinyl plank)
A waterproof, wood-look floor made of layered vinyl. See LVP flooring.
Mil
A unit of thickness equal to one thousandth of an inch, used to measure the wear layer on LVP.
Nosing
The rounded front edge of a stair tread.
Pad (carpet cushion)
The layer under carpet that adds comfort, absorbs sound and helps the carpet last.
Quarter round
A small rounded trim piece installed at the base of a baseboard to cover the expansion gap.
Rigid core (SPC or WPC)
A stiff core used in many LVP products. It hides small subfloor flaws and resists dents better than a flexible core.
Subfloor
The structural layer under your finished floor, usually plywood, OSB or a concrete slab. See subfloor preparation.
Tack strip
Thin wood strips with small pins that run around the edge of a room and hold carpet in place.
Thinset
The mortar used to set tile onto the subfloor.
Transition strip (threshold)
A piece that joins two different floors or heights, for example where carpet meets LVP.
Underlayment
A layer between the subfloor and the finished floor that adds cushion, reduces sound or protects against moisture.
Wear layer
The clear protective top layer on LVP that resists scratches, scuffs and stains. Thicker layers last longer.

Not sure what something means for your project?

Ask us. We are happy to explain the details when we come out for your free estimate.

Call (765) 752-1613 — Free Estimate