Luxury vinyl plank is one of the best floors for concrete, in basements, garages turned living space, and slab-on-grade homes. It only works well when the slab is ready.
Waterproof LVP is a popular choice over concrete because it is comfortable, waterproof and available in rigid-core versions that hide small slab imperfections. But the slab has to pass a few checks before any plank goes down.
Concrete is porous and can carry moisture up from the ground below. Signs include stains, white powdery deposits, a musty smell, condensation and dampness after rain. Manufacturers set limits on how much moisture the slab can have, and installing over a wet slab can void the warranty and lead to failure. New concrete also needs time to cure and dry before flooring goes on it.
Floating floors need a flat surface. Dips and humps show up later as gaps, flexing planks and worn spots. Low areas can be filled with leveling compound, and high spots ground down. Manufacturers list the flatness tolerance for each product.
Cracks and holes are filled, and dust, oil, paint and old adhesive are removed. A painted or sealed slab may need special attention, since coatings can affect both moisture readings and adhesion for glue-down products.
Many LVP products have a pad attached. Others need a separate underlayment, and some require a moisture barrier. We follow the manufacturer’s instructions for the product you choose. Floating floors are laid with a small expansion gap around the edges so the floor can move, and baseboards or quarter round cover the gap. Some products are glued down instead of floated, depending on the manufacturer and the application.
Concrete stays cool. LVP with an attached pad feels warmer than tile, and area rugs make a big difference in living areas. If you have radiant heat in the slab, follow the manufacturer’s temperature limits and tell us before installation.
Related service: Basement flooring installation
It depends on the product and the slab. Many floating floors use an underlayment with a moisture barrier, and manufacturers spell out their requirements. We follow them.
Usually yes, after the cracks are repaired. Active or widening cracks should be looked at first.
We can level low spots with leveling compound and grind down high spots. We tell you what is needed at your estimate.
New concrete has to cure and dry first, and manufacturers give guidance on how long to wait. We can help you time the flooring.
Tell us about your project and we will follow up to talk through options at a few price levels. We install flooring throughout Putnam, Hendricks and Owen counties.
LVP and laminate can look alike but behave very differently. Compare water resistance, durability, feel and best rooms before you choose.
Read the guide →What to move, what to expect and how to prepare your home before a new floor is installed, from clearing the room to caring for the floor afterward.
Read the guide →Scratches, spills and accidents are part of life with pets and kids. Compare LVP, laminate, carpet, hardwood and tile for busy households.
Read the guide →